DTF Application & Care Instructions

 DTF transfers require the use of a commercial grade heat press due to the high, even pressure that is needed for the correct application. You cannot use a cricut heat press or at home irons. DTF needs even and heavy pressure to seal in the print.

No teflon sheets or parchment paper is needed for covering your press. Using teflon can cause issues when pressing.

Application Instructions:

Prepress garment to remove excess moisture

Be sure to place transfer on shirt vibrant side up facing you.

Pressing Temperature: 300°F-325°F

Pressing Time: 20-25 seconds

Pressure: HIGH 8-9 PSI

Peel: COLD PEEL

Optional: We prefer to do another 5 second press after the cold peel. 

 

We recommend that all DTF graphics are washed inside out on a cool cycle. You can hang dry for longevity or use a no/low heat tumble dry. The less heat that is used during wash will reduce the amount of wear that any graphic eventually will have and keep your graphics vibrant! 

We are not responsible for damaged transfers after you have pressed them. Please make sure you are knowledgeable on your heat, pressing pressure and peeling technique. This includes using non-commercial grade heat presses or irons to try and use our transfers. 

ALL SALES ARE FINAL DUE TO THE NATURE OF THE PRODUCT.