Screen Print Transfer Application

ALL TRANSFERS MUST BE APPLIED WITH A HEAT PRESS!!! WE ARE NOT RESPONSIBLE FOR TRANSFERS APPLIED INCORRECTLY.

 All Single Color

SCREEN PRINT TRANSFERS:

Heat: 325

Pre-Press:7 seconds

HEAVY PRESSURE

10 seconds 

HOT PEEL

HIGH HEAT TRANSFERS

 (Full color transfers and will state in the listing HIGH HEAT)

Pre-press:7 seconds

Start at 350 with HEAVY and EVEN pressure and increase the heat by 5 degrees each time if the print is not sticking and repress.

375 is recommended from manufacturer for 7 seconds, however we personally use 360. Use more pressure than what you would use for the low heat transfers. If your press is too hot, the screen will look faded. No teflon. We suggest  that you check to make sure your heat on your press is accurate.

 Plastisol Ink Screen Print Transfer, this can be applied to any combination of polyester/cotton, including 100% cotton.